Scrappee Marlin Kit - With Tyvek® Custom Printed Floats
An AQUATIC Scrappee float plane that's ready to puddle hop with the addition of two Tyvek covered floats and a new, eye catching colour scheme. Also includes Scrappee bush wheels.
Based on the Scrappee Patriot II airframe, the new Scrappee MARLIN is yet another way to enjoy this great micro RC aircraft. AND it's also available with the Microaces LED system to add another dimension to the mix:
- An easy, quick build kit that's also tough AND repairable
- Easy build Tyvek® float system that's interchangeable with the supplied bush wheels
- Custom printed float design to match the aircraft livery
- Includes PLUS motor/gearbox to enable smooth take-offs from water
- A great way to experience micro flying over water
- Optional plug and play, easy install LED system to extend flying into the evening
This is a kit that's not only for the beginner, but also for anyone with a sense of fun and adventure who wants to enjoy all aspects of model RC flying.
The Tyvek® floats will also enable you to take off from, and land onto smooth solid surfaces and short grass. Show off the fabulous look of this aircraft wherever you fly!
NOTE: To get your Scrappee in the air you will need an RC transmitter (compatible with one of the 4 types of receiver available) plus a suitable battery and charger. Please feel free to CONTACT US if you need some guidance!
Selecting the right receiver to complete your kit:
The Microaces AIO 5CH micro receiver is available with the following protocols. If unsure, check your transmitter instruction manual to find out which protocol(s) it uses. Then select the compatible receiver protocol below to view the appropriate receiver to add to your order.
|DSM2/X Compat.||S-FHSS Compat.||FrSky D8 Compat.||FrSky D16 Compat.|
Scrappee kits come with a step by step printed Assembly Guide illustrating every detail of the build to ensure you succeed in producing a great looking and flying model.
Click on the booklet to download!
Microaces Scrappee Marlin
|Airframe||Sports Float Plane|
|Controls||Rudder, Elevator, Throttle|
|Length||330mm / 13"|
|Wingspan||430mm / 17.0"|
|Wing Area||3.68 sq dm / 57 sq in.|
|Flying Weight.||45 - 49g/1.6 - 1.7oz|
|Wing Load||~12.9 g/sq.dm / 4.2 oz/sq.ft.|
|Rec. Motor / G.Box*||
Microaces PLUS Motor Gearbox with STANDARD prop shaft
|Rec. Prop*||GWS 4530|
|Skill Level - Build||Beginner|
|Skill Level - Pilot||Beginner|
|Rec. Adhesive||Deluxe Materials Foam2Foam|
*Now included in the kit
|NOW INCLUDES||Brushed PLUS Motor/Gearbox with standard prop shaft|
|GWS 4530 Prop and rubber prop adapter|
|Optional||Microaces LED Lighting Kit A|
|SHEET PARTS||2mm laser cut foam Airframe sheet|
|1mm printed & laser cut Depron fuselage sheet|
|1mm printed & laser cut Depron flight surfaces sheet x 2|
|200 micron printed & laser cut polypropylene sheet|
|polyester sticker sheet|
|FLOAT PARTS||2 x Printed & laser cut Tyvek Sheets|
|2 x 2mm laser cut foam sheet|
|3D printed Float Attachment Bracket Pair|
|LOOSE PARTS||0.8mm laser cut plywood PLUS motor mount|
|Two 30mm Ø Sponge rubber tires + 3D printed hub assembly|
|Four 3mm & two 4mm Ø noedymium magnets|
|2mm Ø carbon fibre rod axle|
|pre-shaped piano wire elevator & rudder control rods|